Lyndex-Nikken C50-4500(H)-EU JIS Style Retention Knob/Pull Stud, 1-8 Thread, 45 deg, 0.9 in Dia Knob, CAT50 Taper, 3.03 in OAL
Lyndex-Nikken C50-4500(H)-EU JIS Style Retention Knob/Pull Stud, 1-8 Thread, 45 deg, 0.9 in Dia Knob, CAT50 Taper, 3.03 in OAL
Manufacturer: Lyndex-Nikken
Brand: Lyndex-Nikken
Part #: LYD-C50-4500(H)-EU
MPN: C50-4500(H)-EU
CPN:
| Angle | : | 45 deg |
| Flange Thickness | : | 0.394 in |
| Flange to Angle Length | : | 1.386 in |
| Flange to Knob Length | : | 1.78 in |
| Knob Diameter | : | 0.9 in |
| Neck Diameter | : | 0.669 in |
| Overall Length | : | 3.03 in |
| Taper Size | : | CAT50 |
| Thread Size | : | 1-8 |
| Through Coolant (Yes/No) | : | Yes |
| Type | : | JIS Style |
Lyndex-Nikken Retention Knob/Pull Stud, JIS Style, Series: 226L, 1-8, 45 deg, 0.9 in Knob Dia, CAT50 Taper, 0.669 in Neck Dia, 3.03 in Overall Length, 0.394 in Flange Thickness, 1.386 in Flange to Angle Length, 1.78 in Flange to Knob Length, Yes Through Coolant (Yes/No)
- Class 3A UNC thread
- Magnetic particle crack tested
- Tensile and shear requirements per ISO and JIS standard
- All locations that make contact with ground spindle mechanism components are ground or hard turned
- Base of pullstud flange is ground to assure perpendicular alignment between pullstud and taper of toolholder
- Tight pitch diameter tolerance helps maintain accurate concentricity between threads and knob limiting the expansion or flaring of the small end of the taper