GARR 27868 VRX Center Cutting Corner Radius Rougher/Finisher End Mill, 3/4 in Dia Cutter, 1-3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, AlTiN/X.CEED Coated
GARR 27868 VRX Center Cutting Corner Radius Rougher/Finisher End Mill, 3/4 in Dia Cutter, 1-3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, AlTiN/X.CEED Coated
Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-27868
MPN: 27868
CPN:
| Cutter Diameter | : | 3/4 in |
| Cutting Direction | : | Right Hand |
| Finish | : | AlTiN/X.CEED Coated |
| Flute Type | : | Staggered |
| Helix Angle | : | 41 deg |
| Length of Cut | : | 1-3/4 in |
| Material | : | Submicron Solid Carbide |
| Number of Flutes | : | 4 |
| Overall Length | : | 4 in |
| Series | : | VRX |
| Shank Diameter | : | 3/4 in |
| Shank Type | : | Weldon Flat |
| Type | : | Center Cutting Corner Radius Rougher/Finisher |
GARR End Mill, Center Cutting Corner Radius Rougher/Finisher, Series: VRX, 3/4 in Diameter Cutter, 4 in Overall Length, 1-3/4 in Length of Cut, 4 Flutes, Staggered Flute, 3/4 in Shank Diameter, Right Hand Cutting Direction, 41 deg Helix Angle, Weldon Flat Shank, Submicron Solid Carbide, AlTiN/X.CEED Coated
- Excellend for High Efficiency Milling
- Reduces vibration for more aggressive machining
- (The combination of an extended flute length with a weldon flat may
- cause the flute washout to reach inside some end mill holders)