GARR 63241 VRX Center Cutting High Performance End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, AlTiN/X.CEED Coated
GARR 63241 VRX Center Cutting High Performance End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, AlTiN/X.CEED Coated
Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-63241
MPN: 63241
CPN:
| Corner Radius | : | 0.02 in |
| Cutter Diameter | : | 1/2 in |
| Cutting Direction | : | Right Hand |
| Finish | : | AlTiN/X.CEED Coated |
| Flute Type | : | Spiral |
| Helix Angle | : | 41 deg |
| Length of Cut | : | 2 in |
| Material | : | Submicron Grain Solid Carbide |
| Number of Flutes | : | 4 |
| Overall Length | : | 6 in |
| Series | : | VRX |
| Shank Diameter | : | 1/2 in |
| Shank Length | : | 4 in |
| Shank Type | : | Plain |
| Type | : | Center Cutting High Performance |
GARR End Mill, Center Cutting High Performance, Series: VRX, 1/2 in Diameter Cutter, 0.02 in Corner Radius, 6 in Overall Length, 2 in Length of Cut, 4 Flutes, Spiral Flute, 1/2 in Shank Diameter, Right Hand Cutting Direction, 41 deg Helix Angle, Plain Shank, 4 in Shank Length, Submicron Grain Solid Carbide, AlTiN/X.CEED Coated
- Excellend for High Efficiency Milling
- Reduces vibration for more aggressive machining
- Staggered flute geometry
- (The combination of an extended flute length with a weldon flat may
- cause the flute washout to reach inside some end mill holders)