GARR 61078 VRX Center Cutting High Performance Corner Radius End Mill, 5/32 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated
GARR 61078 VRX Center Cutting High Performance Corner Radius End Mill, 5/32 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated
Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-61078
MPN: 61078
CPN:
California residents
| Corner Radius | : | 0.03 in |
| Cutter Diameter | : | 5/32 in |
| Cutting Direction | : | Right Hand |
| Finish | : | AlTiN Coated |
| Flute Type | : | Spiral |
| Helix Angle | : | 41 deg |
| Length of Cut | : | 1/2 in |
| Material | : | Solid Submicron Grain Carbide |
| Number of Flutes | : | 4 |
| Overall Length | : | 2 in |
| Series | : | VRX |
| Shank Diameter | : | 3/16 in |
| Shank Type | : | Plain |
| Type | : | Center Cutting High Performance |
GARR Corner Radius End Mill, Center Cutting High Performance, Series: VRX, 5/32 in Diameter Cutter, 0.03 in Corner Radius, 2 in Overall Length, 1/2 in Length of Cut, 4 Flutes, Spiral Flute, 3/16 in Shank Diameter, Right Hand Cutting Direction, 41 deg Helix Angle, Plain Shank, Solid Submicron Grain Carbide, AlTiN Coated
- Excellend for High Efficiency Milling
- Reduces vibration for more aggressive machining
- Staggered flute geometry
- (The combination of an extended flute length with a weldon flat may
- cause the flute washout to reach inside some end mill holders)