GARR 27670 VRX Center Cutting High Performance Single End Mill, 3/8 in Dia Cutter, 0.01 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, AlTiN/X.CEED Coated
GARR 27670 VRX Center Cutting High Performance Single End Mill, 3/8 in Dia Cutter, 0.01 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, AlTiN/X.CEED Coated
Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-27670
MPN: 27670
CPN:
| Corner Radius | : | 0.01 in |
| Cutter Diameter | : | 3/8 in |
| Cutting Direction | : | Right Hand |
| Finish | : | AlTiN/X.CEED Coated |
| Flute Type | : | Spiral |
| Helix Angle | : | 41 deg |
| Length of Cut | : | 7/8 in |
| Material | : | Submicron Grain Solid Carbide |
| Number of Flutes | : | 4 |
| Overall Length | : | 2-1/2 in |
| Series | : | VRX |
| Shank Diameter | : | 3/8 in |
| Shank Length | : | 1-5/8 in |
| Shank Type | : | Plain |
| Type | : | Center Cutting High Performance Single End |
GARR End Mill, Center Cutting High Performance Single End, Series: VRX, 3/8 in Diameter Cutter, 0.01 in Corner Radius, 2-1/2 in Overall Length, 7/8 in Length of Cut, 4 Flutes, Spiral Flute, 3/8 in Shank Diameter, Right Hand Cutting Direction, 41 deg Helix Angle, Plain Shank, 1-5/8 in Shank Length, Submicron Grain Solid Carbide, AlTiN/X.CEED Coated
- Excellend for High Efficiency Milling
- Reduces vibration for more aggressive machining
- Staggered flute geometry
- (The combination of an extended flute length with a weldon flat may
- cause the flute washout to reach inside some end mill holders)