Bassett B05052 HPEM-3 Center Cutting High Performance Regular Length End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 3 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, TiCN Coated
Bassett B05052 HPEM-3 Center Cutting High Performance Regular Length End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 3 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, TiCN Coated
Manufacturer: Greenfield Industries
Brand: Bassett
Part #: BAS-B05052
MPN: B05052
CPN:
| Corner Radius | : | 0.02 in |
| Cutter Diameter | : | 5/16 in |
| Cutting Direction | : | Right Hand |
| Finish | : | TiCN Coated |
| Flute Type | : | Spiral |
| Helix Angle | : | 30 deg |
| Length of Cut | : | 13/16 in |
| Material | : | Solid Carbide |
| Number of Flutes | : | 3 |
| Overall Length | : | 2-1/2 in |
| Series | : | HPEM-3 |
| Shank Diameter | : | 5/16 in |
| Shank Type | : | Straight |
| Type | : | Center Cutting High Performance Regular Length |
Bassett End Mill, Center Cutting High Performance Regular Length, Series: HPEM-3, 5/16 in Diameter Cutter, 0.02 in Corner Radius, 2-1/2 in Overall Length, 13/16 in Length of Cut, 3 Flutes, Spiral Flute, 5/16 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Straight Shank, Solid Carbide, TiCN Coated
- Maximized strength due to increased cross sectional area in the core and flute body
- Combination of micrograin carbide substrate with high performance coatings
- Achieve 50% greater chip loads and 20 to 40% higher speeds than conventional end mills
- Designed for cutting applications involving excessive mechanical stress
- Ideally suited for use in stainless steel and exotics such as hastalloy, waspalloy and inconel