Bassett B05031 HPEM-3 Center Cutting High Performance Stub Length End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 3 Flutes, 5/8 in Dia Shank, 3 in OAL, TiCN Coated
Bassett B05031 HPEM-3 Center Cutting High Performance Stub Length End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 3 Flutes, 5/8 in Dia Shank, 3 in OAL, TiCN Coated
Manufacturer: Greenfield Industries
Brand: Bassett
Part #: BAS-B05031
MPN: B05031
CPN:
| Corner Radius | : | 0.03 in |
| Cutter Diameter | : | 5/8 in |
| Cutting Direction | : | Right Hand |
| Finish | : | TiCN Coated |
| Flute Type | : | Spiral |
| Helix Angle | : | 30 deg |
| Length of Cut | : | 3/4 in |
| Material | : | Solid Carbide |
| Number of Flutes | : | 3 |
| Overall Length | : | 3 in |
| Series | : | HPEM-3 |
| Shank Diameter | : | 5/8 in |
| Shank Type | : | Straight/Weldon Flat |
| Type | : | Center Cutting High Performance Stub Length |
Bassett End Mill, Center Cutting High Performance Stub Length, Series: HPEM-3, 5/8 in Diameter Cutter, 0.03 in Corner Radius, 3 in Overall Length, 3/4 in Length of Cut, 3 Flutes, Spiral Flute, 5/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Straight/Weldon Flat Shank, Solid Carbide, TiCN Coated
- Maximized strength due to increased cross sectional area in the core and flute body
- Combination of micrograin carbide substrate with high performance coatings
- Achieve 50% greater chip loads and 20 to 40% higher speeds than conventional end mills
- Designed for cutting applications involving excessive mechanical stress
- Ideally suited for use in stainless steel and exotics such as hastalloy, waspalloy and inconel