Cle-Force™ C68807 1682 Regular Helix Taper Shank Drill Bit, 37/64 in Drill - Fraction, 0.5781 in Drill - Decimal Inch, #2 Morse Taper Shank Taper, HSS
Cle-Force™ C68807 1682 Regular Helix Taper Shank Drill Bit, 37/64 in Drill - Fraction, 0.5781 in Drill - Decimal Inch, #2 Morse Taper Shank Taper, HSS
Manufacturer: Greenfield Industries
Brand: Cle-Force™
Part #: CLF-C68807
MPN: C68807
CPN:
| Applicable Materials | : | Gray Cast Iron, Alloy Steel, Carbon Steel, Low Carbon Steel and Nodular Cast Iron |
| Cutting Depth | : | 4-7/8 in |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | HSS |
| Drill Diameter Measurement System | : | Imperial |
| Drill Size - Decimal Inch | : | 0.5781 in |
| Drill Size - Fraction | : | 37/64 in |
| Finish | : | Black Oxide |
| Flute Length | : | 4-7/8 in |
| Flute Type | : | Spiral |
| Material | : | HSS |
| Number of Flutes | : | 2 |
| Overall Length | : | 8-3/4 in |
| Point Angle | : | 118 deg |
| Point Type | : | Radial |
| Series | : | 1682 |
| Shank Taper Designation | : | #2 Morse Taper |
| Through Coolant (Yes/No) | : | No |
| Type | : | Regular Helix |
Cle-Force™ Taper Shank Drill Bit, Regular Helix, Series: 1682, Imperial, 37/64 in Drill - Fraction, 0.5781 in Drill - Decimal Inch, 8-3/4 in Overall Length, 4-7/8 in Cutting Depth, 2 Flutes, Spiral Flute, 4-7/8 in Flute Length, #2 Morse Taper Shank Taper Designation, 118 deg Point, Radial Point, Right Hand Cutting Direction, HSS Cutting Edge, No Through Coolant, HSS, Black Oxide, Applicable Materials: Gray Cast Iron, Alloy Steel, Carbon Steel, Low Carbon Steel and Nodular Cast Iron
- General purpose geometry with standard morse taper shank dimensions
- HSS substrate engineered for toughness and ideal for portable drilling and maintenance applications
- Black oxide finish for increased wear resistance and improved lubricity, reduced chip welding and galling