Chicago-Latrobe® 53032 510 Heavy Duty Taper Shank Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, #2 Morse Taper Shank Taper, M42 HSS-Co 8
Chicago-Latrobe® 53032 510 Heavy Duty Taper Shank Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, #2 Morse Taper Shank Taper, M42 HSS-Co 8
Manufacturer: Greenfield Industries
Brand: Chicago-Latrobe®
Part #: CHI508-53032
MPN: 53032
CPN:
| Applicable Materials | : | Carbon Steel, Cast Iron, Tool Steel and Stainless Steel |
| Cutting Depth | : | 4-3/8 in |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | M42 HSS-Co 8 |
| Drill Diameter Measurement System | : | Imperial |
| Drill Size - Decimal Inch | : | 0.5 in |
| Drill Size - Fraction | : | 1/2 in |
| Finish | : | Steam Oxide/Straw |
| Flute Length | : | 4-3/8 in |
| Flute Type | : | Spiral |
| Material | : | M42 HSS-Co 8 |
| Number of Flutes | : | 2 |
| Overall Length | : | 8-1/4 in |
| Point Angle | : | 135 deg |
| Point Type | : | Notched |
| Series | : | 510 |
| Shank Taper Designation | : | #2 Morse Taper |
| Through Coolant (Yes/No) | : | No |
| Type | : | Heavy Duty |
Chicago-Latrobe® Taper Shank Drill Bit, Heavy Duty, Series: 510, Imperial, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 8-1/4 in Overall Length, 4-3/8 in Cutting Depth, 2 Flutes, Spiral Flute, 4-3/8 in Flute Length, #2 Morse Taper Shank Taper Designation, 135 deg Point, Notched Point, Right Hand Cutting Direction, M42 HSS-Co 8 Cutting Edge, No Through Coolant, M42 HSS-Co 8, Steam Oxide/Straw, Applicable Materials: Carbon Steel, Cast Iron, Tool Steel and Stainless Steel
- Heavy duty geometry for drilling in tough, high tensile materials under extreme operating conditions
- Taper shank made to american national standard (morse) dimensions for use in corresponding morse taper holders
- 135 deg notch point reduces thrust forces and allows easier penetration
- Straw finish easily identifies cobalt tooling